Ford Power Stroke Nation banner

upgrading fuel selector valve for better flow.

1 reading
9.1K views 18 replies 11 participants last post by  bean  
#1 ·
has anyone upgraded their fuel selector valve to get better flow?? if so how and what parts do i need to do it. i have 250c hybrids with 100% nozzles and i can't keep the fuel pressure up igh enough due to small fuel line from tank through selector and to the pump.

thanks
 
#2 ·
i read in someone's e-fuel post that they used the autozone fuel selector for the larger size.

i can't seem to remember who's it is...sorry.

bj
 
#4 ·
Joey you are getting a little nutty. LOL No other mod has even looked at this thread except me and I did not touch it.
 
#7 ·
wish some one had the part # for the bigger valve ?? hate to have to run Y's and a second valve.
 
#8 ·
why are u lookin to use selector valve
 
#9 ·
to keep both tanks
I don't wht to plum them togeterh ( leak prospect)
 
#11 ·
are the pple that are tryin to do this mod have a fuel press gauge in ur truck
 
#12 ·
I have a gauge on mine. Bean 1 or 2x SD pump handle it or what pump for 238's?

I have 150's today set @ 65 psi @ wot drops to 62-63
But I am putting in 238's next week :)
 
#13 ·
Did you get your 238's in? Just wondering how much they pull down your current e-fuel compared to the 150's.

Let use know how much pressure drop you get in comparison.
 
#14 ·
injectors should be here today working one exhaust and uping the fuel lines in the valey ( I still have the banjo set-up) but going to a Y and 3/8 lines from the heads to the stock line from the back.
 
#16 ·
Where did you get it? Cost?