You'll need the filter and holder.
About 4ft of 3/8 heater hose
2 fittings to go to and from the housing unit.
2 T fittings for the hose
You cann also get 2 valves so you can shut off the collant flow when you change the filter. I'll try to get a picture of how much sh!t my filter cleaned up.

 

Where can I get the holder at?

 

I think that someone did their own and it worked out to be the same price as the Dieselsite one..... the performance machine has a good looking kit as well....

 

You can get the coolant filter head at Car Quest the part number is 89019 but you will have to make a mounting bracket for it. It runs about 44 dollars.

 

Is it good quality? And do you use it or do you know anyone that does?

 

I bought mine through dieselsite I think it was around 120 or something like that come with everything you need just can't beat the price.

 

exactly.

 

Need a little help....I'm fixing to run 4" turbo back, replace my current programmer with a H&S Black Maxx, and do a EGR delete. Is it necessary to go ahead and do the oil cooler?

 

you would probably get better responses if you started your own thread about that and not post your question in a thread about coolant filter set ups....

 

wouldn't be a bad idea specially if you don't know what the temp splits were

 

Coolant Filters, MUST be WITHOUT additive block.

A list of all filters that will fit:
-Donaldson ECF4085 is @ 14M

ACDelco WF108
-Alliance (Freightliner) WF2077
-Baldwin B5088 (high efficiency/long life/short length)
-Baldwin B5089 (short length)
-Baldwin B5090 (high efficiency/long life)
-Baldwin B5134
-Big A 96083 (high efficiency/long life/short length)
-Big A 96084 (high efficiency/long life)
-Carquest 89070
-Carquest 89083 (high efficiency/long life/short length)
-Carquest 89084 (high efficiency/long life)
-Caterpillar 9Y4528
-Cummins 3098689 (high efficiency/long life/short length)
-Cummins 3098690 (high efficiency/long life)
-Cummins 3300721
-Cummins XWF4245 (high efficiency/long life)
-Cummins XWF4246 (high efficiency/long life/short length)
-Donaldson ECF4085 (14 μm absolute)
-Donaldson P554685
-Fleetguard WF2077
-Fleetguard WF2122 (high efficiency/long life/short length)
-Fleetguard WF2123 (high efficiency/long life)
-Fleetrite WFR82122 (high efficiency/long life/short length)
-Fleetrite WFR82123 (high efficiency/long life)
-Ford E7NN8A469AA
-Fram PR3383
-GM 25010844
-Hastings WC13 (high efficiency/long life/short length)
-Hino 1630441015
-John Deere RE11992
-Kralinator CM83 (high efficiency/long life/short length)
-Kralinator CM84 (high efficiency/long life)
-Luber-Finer LFW4685XL (high efficiency/long life)
-NAPA 4069 (short length)
-NAPA 4070
-NAPA 4083 (high efficiency/long life/short length)
-NAPA 4084 (high efficiency/long life)
-NAPA 4087
-Wix 24070
-Wix 24083 (high efficiency/long life/short length)
-Wix 24084 (high efficiency/long life)

 

i went the easy way as well and bought one from RCD when they did my headgaskets. Theirs is a pretty nice kit IMO

 

Quite a list TERM3 you can also add WIX 24087 and 24069. Keep up the good work. Watch out Bismic.LOL