Ford Power Stroke Nation banner

1 - 5 of 5 Posts

·
Back in Black
Joined
·
1,379 Posts
Discussion Starter #1
Just picked up a snow performance kit.

I am running an h2e turbo mount, where is the best place to inject it? one hose into top of intake y or 2 different spots and where?


Thanks
 

·
Village Idiot
Joined
·
8,209 Posts
Ask joe ..aka csdip he runs an h2e and has some pics
 

·
PSN Pretender
Joined
·
1,926 Posts
I will be using two nozzles mounted in the base of the "Y" (one for each bank). This way water will be injected evenly to each head, and strait into the engine, no bends or curves to go around.

I also plan on running a second stage with a single nozzle mounted right before the "Y".
 

·
Well Hung Member
Joined
·
635 Posts
the y pipe thats sittin in my spare room for you has 2 bungs in it? if you remember before with the setups that we bought they recommended us to have the smaller injector on the hot side, and the bigger on the cold side, but i think that was mostly for the methanol side of things(but i could be mistaken) anybody have input on this?
 

·
Back in Black
Joined
·
1,379 Posts
Discussion Starter #5
I went ahead and did it in the two thinker circles already in the hypermax y.

a lot thinker tapped nice, and like mentioned before, straight into the engine.

Now what about where NOS is injected, does it loose anything through the IC? thats where the guy i had bought it from had his tapped, so thats where i put mine, but after thinking about it i dont think it is the right place.
 
1 - 5 of 5 Posts
Top