[Cratos]

Can you change the valve springs without pulling the heads?? dirverside looks ok but can you do pass side with it on?

 

[jlau6888]

Yes. Not from personal experience but I asked the same question a while back.

 

[smokyred]

Yes, most of us have done them in the truck.

For the passenger side, rear springs, just take the part of the HVAC box off that is close to the valve cover. Just remember that there is one screw that you'll have to get from inside the truck.

Dave

 

[Cratos]

ok thanks

 

[Cratos]

can the push rods be done with the heads on too??
tring to deside if I should go ahead and get a set of heads done ( valve job) or just put them in

 

[Powerstroke Racer]

can the push rods be done with the heads on too??
tring to deside if I should go ahead and get a set of heads done ( valve job) or just put them in

Yes, they drop right in.

 

[Dirk]

can the push rods be done with the heads on too??
tring to deside if I should go ahead and get a set of heads done ( valve job) or just put them in

Yes, they drop right in.

David is correct. Do one at a time. Re torque the rockers to 115-120in pounds.