Ford Power Stroke Nation banner

1 - 7 of 7 Posts

·
Registered
Joined
·
669 Posts
Discussion Starter #1
Just bought this chip week ago from guy on here. The first setting seems stock setting. 2nd setting seems like slight bump in power idles raised up a 100-200 rpm. 3rd setting adds lots of power/very quick throttle responce but truck idles at 1000rpm. 4th had check engine, wait to start light come on for a sec or so. 5th idle raised to 1200 rpm and last seemed same as first setting.

Heres how guy posted sell:

I just bought a new ecu and need to sell my TS 6 position chip for the early 99 pcm. Has 60hp, 80hp, 120hp, 140hp, high idle, stock.

Thanks
His trucks early 99 auto, mines early 99 6 speed

His pcm xle4 I believe his post said. Mine awa3. But figuted only difference is his was auto an mines 6 speed so should work?
 

·
Registered
Joined
·
3,940 Posts
are you positive both are early?
 

·
Registered
Joined
·
669 Posts
Discussion Starter #3
He said his was a early 99 auto. So only difference is his was auto an mines 6 speed
 

·
Member
Joined
·
143 Posts
Auto and stick tunes are different I believe. I have seen other with problems
when the chip is burnt for a different trans.
 

·
Registered
Joined
·
387 Posts
DIFFERENT TRANS DIFFERENT TUNE SET UP...
 

·
Registered
Joined
·
3,940 Posts
I've heard that you can run an auto pcm in a standard but not a standard in an auto (no shifting) Not sure about the chip. I think I would get some new tunes. Maybe one of our fine tuners will jump in here. Good luck.
 

·
Registered
Joined
·
669 Posts
Discussion Starter #7
Already sent chip to kt performance to get my pcm code put on and 6 new tunes ;)
 
1 - 7 of 7 Posts
Top