Ford Power Stroke Nation banner

1 - 9 of 9 Posts

·
Stroke it B!tch
Joined
·
964 Posts
Discussion Starter #1
Well i origanlly had an 8in lift everything was fine droped it back down to 6 and now while driving down the road if theres a crack in the road it will pull the truck around like its nothing. I also have energy sway bar bushing's i tried to get stock ones but my sway bar is 7/8 in. autozone only pulls up 1 1/4in diameter. WTF is going on here?

Also i noticed my pitman drop arm is 2 in to low i also have some bumpsteer.
Thanks for the help yall
 

·
Stroke it B!tch
Joined
·
964 Posts
Discussion Starter #3
Yes sir. And I took it back and was re affirmed it was within spec but doesn't make sense cuz it still pulls slightly. But no tire wear what so ever.
 

·
Administrator
Joined
·
32,960 Posts
mine had a little issue when My procomps were getting to the end of their tire life

new tires fixed it

then I actually had a blown gas charged rancho give me some weird handling until I discovered it

but I would start with getting your track bar and steering close to the same angle if it were Me
 

·
Stroke it B!tch
Joined
·
964 Posts
Discussion Starter #5
Yea that's what I'm thinking as well cuz when I had the 8in lift it wasn't to bad. Also I hate my dick cepek tires they ride way worse than my toyo's. Again zmann to my rescue haha I'm gonna come up to Phoenix one day I'm buy around of shots.
 

·
Registered
Joined
·
1,102 Posts
A friend had some DC tires and hated them.. was about to get some and glad i didn't.
 

·
Stroke it B!tch
Joined
·
964 Posts
Discussion Starter #8
Yea I'm definitely going back to toyo's when I get done with these!

Ya zaman let me know I work until the 28th and I'm off for 6 days.
 

·
Stroke it B!tch
Joined
·
964 Posts
Discussion Starter #9
So I ended up going over to trever at Pmf and we tightened the joint on the adjustable trac bar and wow what a diffrence. Thanks for the help y'all.
 
1 - 9 of 9 Posts
Top