Ford Power Stroke Nation banner

1 - 1 of 1 Posts

·
Registered
Joined
·
358 Posts
Discussion Starter #1
so a tonight i started that my trans out to put my new clutch in. got every thing out with no problems till i hit snag. the guy before me put a clutch in it and when he put it back he locktited the bolts on the started with red locktite. i got the two bottoms out the were a real pain but now i cant get the top out i took the inner fender well out to try and get at it better but i gotta buy a 6 point 17mm so i dont strip it out. now i get the t case out no problem take the trans bolts out get the trans jack under it. and now the trans does not wanna slide off of the motor. i got it in Netral and it still wont come out. any advise this is my first clutch install so any input i will kindly take. is there a trick to get it out i just dont know, and the starter bolts dont have to come out they dont thread into the trans so idk why it wont come out.
 
1 - 1 of 1 Posts
Top