Ford Power Stroke Nation banner

1 - 15 of 15 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
I have a 91 250 7.3 and I am looking at a set of wheels. they are 325 65 18 does anyone know if they will fit? My truck is stock height. Thanks in advance
 

·
Looking,Listening&Learnin
Joined
·
79 Posts
you might have to trim the front bumper. the back should be fine
 

·
Need more power!!
Joined
·
358 Posts
Ya :whs: 33's are tight and I had to trim the bumper to clear them on all my IDI's. And those are 35's.
 

·
Registered
Joined
·
42 Posts
They're still a 35, just a 13 wide vs the 12.50 of a 315/75R16. You will have to trim the bumper, but, so long as the offset isn't goofy on your wheels, you should be able to fit them reasonably well.
 

·
needs more fuel
Joined
·
697 Posts
i may of missed it but is your truck 2x4 or 4x4? if 4x4 an add a leaf and trimming the front bumper, then they should fit. 2x4 get out the sawzall LOL
 

·
Registered
Joined
·
42 Posts
Add a leaf? Not needed, besides, TTB is enough of a pain to align.


STOCK, well beaten(former loggers truck) 96 F250 with 223k miles, 315/75R16's on 16x10's. They rub the spring at full lock to the left, but every Ford seems to do that.
 

·
needs more fuel
Joined
·
697 Posts
heres my old 93 f250 wore out farm truck, add a leaf with no bumper and 35x12.5x16.5

 

·
needs more fuel
Joined
·
697 Posts
and they didnt rub anything but the bumper. i later put on a psd bumper and only had to trim the lower part of it.
 

·
STILL LEARNING
Joined
·
18,324 Posts
Add a leaf? Not needed, besides, TTB is enough of a pain to align.


STOCK, well beaten(former loggers truck) 96 F250 with 223k miles, 315/75R16's on 16x10's. They rub the spring at full lock to the left, but every Ford seems to do that.
And your bumper is well trimmed
 

·
Registered
Joined
·
42 Posts
I did say the bumper needed trimming. I probably took off more than needed, but, I followed the edge of where it rolls from the factory. The truck previously had 33's on it with no trimming
 

·
STILL LEARNING
Joined
·
18,324 Posts
heres my old 93 f250 wore out farm truck, add a leaf with no bumper and 35x12.5x16.5

Do you have any better pics of the front suspension on that truck? It appears to have a dropped spring hanger
 

·
needs more fuel
Joined
·
697 Posts
hows these?





 

·
needs more fuel
Joined
·
697 Posts
yep them pics sucked. couldnt see em big in my photobucket. heres one from a long time ago maybe you can see the hanger here


 

·
Registered
Joined
·
477 Posts
i fit 35s on my 89 350 with only needing to trim about an inch off the bumper
 
1 - 15 of 15 Posts
Top