Joined
·
2 Posts
Is it possible to install a sway bar on 2000 F250 2wd with twin I beam suspension?
Sway bar
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Bad steering box?
Suspension and DrivetrainMy truck just started having an interminttent steering issue. The steering jumps back and forth like your jerking on the wheel. Whole front end is tight and I rotated the tires and I have the same issue. Could the steering box be going bad? Theres no play in the steering wheel. 2003 F250 on 35's- 5
- 223
-
'94 Dana 60 swap in '97 7.3
Suspension and DrivetrainHey all, I've had a ECLB F250 7.3 for 5 years or so, the truck has had a shot ttb front end since i bought it and have always planned a D60 swap, have already had one bj D60 to swap in but never got around to it and had to sell the D60 while moving. Today I picked up a '94 F350 Gasser (460) with...- 1
- 455
-
‘93 OBS DRW rear axle swap
Suspension and DrivetrainI hope I’m not double posting on this topic. I’ve read in some threads but I don’t think my question has specifically been addressed. I’m about to do a 4x4 conversion on my OBS dually using 05+ axles and coils. I want to swap the rear axle as well so I can run disc brakes all the way around...- 0
- 168
-
Anyone have a Leveling kit on top of their lift?
Suspension and DrivetrainHas anyone put a leveling kit (spacers) on top of there lift kits on an 05-07 F250 4x4. I have a 8" Rough country lift and im wanting to put a 2.5" Leveling kit on top of it because the back is higher than the front right now. But all the shops are telling me they wont do it because it already...- 34
- 31K
-
Strokin4life · updated
-
What gears and size tires are you guys running?
Suspension and DrivetrainI'm looking to re-gear my truck, mostly so I can pull a toy hauler. I'm currently running 3.55 gears and 35" tires. Without weight, she is a dog. With weight, I'll probably turn my transmission into a puddle of burnt fluid and clutch remnants. After reading up on the GCWR of these trucks, it...- 10
- 539
-
Mech E · updated
Join now to ask and comment!