Ford Power Stroke Nation banner

1 - 7 of 7 Posts

·
Junior Mint
Joined
·
2,461 Posts
Discussion Starter #1
These are stock BD injectors (244cc) w/ a 28 liters of air per minute Extrude hone nozzle done by Dynomite Diesel.

To run at their potential you will need Big Oil to operate any set of B code injectors.

These injectors ran fine and were removed from my rig on 3/14/10 as I just wanted to go larger.

They can make the hp w/ proper programming. 500+ rwhp is doable w/ supporting mods. More w/ larger nozzles.

Price is $1,000 w/ any 8 matching running cores OR $1,250 without cores.

Injectors are located in Austin, TX and I can ship. Also, I except PP and am verified.

Thanks for looking.

[email protected]
 

·
Junior Mint
Joined
·
2,461 Posts
Discussion Starter #5
What percentage are they over stock BD? or what is the hole size?

lpm don't mean nothin to me.
Stock injectors flow around 17 lpm. Size is somewhere in the .0075"-.0080" range.

It's hard to compare lpm from an EDM nozzle to an EH nozzle because the EH process sort of ports the holes and allows them to flow considerably more diesel than a similiar sized EDM nozzle.
 

·
Village Idiot
Joined
·
8,209 Posts
Didn't think those would last long
 
1 - 7 of 7 Posts
Top