Ford Power Stroke Nation banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
9,722 Posts
Discussion Starter #1
This is for the people who didn't recieve the relearn procedure in their installation sheet for the TCM from Spartan...

1.) From a stop, accelerate the vehicle to 55-60 mph at approximately 1/4 throttle. DO THIS TWICE.
2.) From a stop, accelerate the vehicle to 65-70 mph at approximately 1/2 throttle. DO THIS TWICE.
3.) From a stop, accelerate the vehicle to 70 mph at approximately 3/4 throttle. DO THIS TWICE.
4.) From a 40 mph roll, press the accelerator to the floorboard quickly (forcing the truck to downshift) and accelerate to around 75 mph.
5.) From a stop, acclerate to 75 mph at wide open throttle (press the accelator to the floor immediately). DO THIS 2-3 TIMES.


I hope this helps guys! This is straight off the procedure sheet.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top