Ford Power Stroke Nation banner

1 - 20 of 32 Posts

·
Registered
Joined
·
118 Posts
Discussion Starter #1
just wanted to get the word out on this one, SAturday Oct 10 in the infield of the 1/4 mile circle track at SAC RACEWAY.

MLM sled, PTPA event. Track open for tech and weighin starting at 2PM, open to spectators at 4PM, pulls start at 7PM.

This will be the first pulls ever held at Sac raceway, and while I don't compete, I certainly would like to see this event get a foothold here so it can grow.


http://www.sacramentoraceway.com
 

·
NHRDA Diesel TV Host
Joined
·
3,037 Posts
Yup we will be out there with my stock truck, 2 street trucks, and maybe the pumpkin super street class truck. Working on getting a couple more DNM trucks there.
 

·
NHRDA Diesel TV Host
Joined
·
3,037 Posts
You'd need traction bars my dear.
 

·
NHRDA Diesel TV Host
Joined
·
3,037 Posts
just wanted to get the word out on this one, SAturday Oct 10 in the infield of the 1/4 mile circle track at SAC RACEWAY.

MLM sled, PTPA event. Track open for tech and weighin starting at 2PM, open to spectators at 4PM, pulls start at 7PM.

This will be the first pulls ever held at Sac raceway, and while I don't compete, I certainly would like to see this event get a foothold here so it can grow.


http://www.sacramentoraceway.com
http://www.mlm-motorsports.com
 

·
NHRDA Diesel TV Host
Joined
·
3,037 Posts
and after a little clarification this is actually a MLM event, not PTPA. I just spoke with Brian. Check out their website for rules and classes.
 

·
Registered
Joined
·
118 Posts
Discussion Starter #9
and after a little clarification this is actually a MLM event, not PTPA. I just spoke with Brian. Check out their website for rules and classes.

I was going off the information I got off the flyer I received at the track during the drags on Sunday and apologize if I misled anybody.
 

·
Registered
Joined
·
2,031 Posts
i'll be there, but i have a lot of work to do to the truck before then. install stack, add weight bar, find out why it wont start, build suspension stops, add limit straps to the front, and replace front u-joint. if i have time i also have to replace the front carrier i broke in the pulls on sat.
 

·
Registered
Joined
·
2,031 Posts
so do i, i got it started today. it was really wierd, i charged it on the charger last night. hooked up the mechanical hpo gauge and started cranking but i had no hpop. i unplugged the icp sensor and got some hpop and it fired. i put the chip back in and plugged the icp sensor back in and it is starting fine now. im curoius if there is a posibility that my lpop is going out and i sucked the hpop reservoir dry. i wonder this because when i went to install the hpo gauge no oil came out when i took the fitting out, but when i went to take it off there was oil present.
 

·
NHRDA Diesel TV Host
Joined
·
3,037 Posts
Ok so far with us we have

Me
Matt
Alex
Grant

Toby, Zach ya'll comin??
 

·
Registered
Joined
·
2,031 Posts
i'll have 3 guys and maybe one girl coming with me also.
 
1 - 20 of 32 Posts
Top