Ford Power Stroke Nation banner
1 - 17 of 17 Posts

·
A Ghost these days...
Joined
·
2,434 Posts
Purchase a Clay Bar kit.

It should have a couple clay bars, and some spray. I had burnt rubber all over the bottom of my truck (after a big clearing job). Spray the solution and start scrubbing w/ the clay bar. It takes alot of elbow grease, but it works.

Good Luck.
 

·
Registered
Joined
·
1,693 Posts
wd-40 will take off rubber from a burnout saturate it let it soad a few mins and start rubbin
 

·
Registered
Joined
·
210 Posts
goo gone like $5 full detail $250ish that includes the whole truck inside and out buff, wax,ect. u may want to call around and price check, but if its not much rubber, they may do it for pretty cheep. personaly id try the goo gone cheep, and paint safe. ;)
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top