So I got finished installing a rc 3 inch lift today. I know there are better more expensive lifts but I pull a 5th wheel so I didn't want huge. I opted for the spings vs spacers. I actually lifted the front about a week ago but just got around to the back today. Did it in my garage & wasn't the worst thing I've done but wasn't the easiest for sure. I tried to find some 350 blocks locally but struck out so I stacked the rc & factory blocks. No off-roading & the u bolts are torqued to 120ftlb. I'm pleased with it. After having it lined up I do have a pop when sitting still & turning the wheel. I can see my passenger side tie rod end jumping a little so I hope that's all it is. Excuse my diff cover, I'm panning on replacing it.
4.6 MB Views: 6