Ford Power Stroke Nation banner
1 - 7 of 7 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #1 ·
Ok, so I replaced a fried FICM that was not repairable and still there is no sound coming from my injectors when I first turn the key on. I've tested the relay and it seems to be working completely fine. Why am I not getting power to the injectors?
 

·
Registered
Joined
·
31 Posts
Discussion Starter · #3 ·
It is actually a used one that has been programmed by PHP and has been tested to confirm it is good. However, when I cycle the key and test it while hooked up I'm still getting less than a volt at the pin under the cover that you are supposed to test on these FICM's.
 

·
Lookin for Operating Job
Joined
·
234 Posts
Where is that fuse at exactly? I am having pertty much the same problem. Maybe you can take a pitcure of it for me or something?
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top