Ford Power Stroke Nation banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,734 Posts
Discussion Starter #1
i have searched all over this site and cant seem to find a write up on how to remove the computer. i know its down there by the E-brake but i dont know what all is involved on getting it out. Any help is appreciated.
 

·
Registered
Joined
·
900 Posts
3 10mm by your foot down there ya gotta take out that hold the cover on and a 10mm below the master cylinder that gotta loosen and it comes right out sorry i dont got any pics
 

·
All done now
Joined
·
22,486 Posts
3 10mm by your foot down there ya gotta take out that hold the cover on and a 10mm below the master cylinder that gotta loosen and it comes right out sorry i dont got any pics
Connector on the firewall is held in by a 10 mm bolt. Case inside the cab, driver side right next to the e-brake pedal. 2 8mm bolds. Remove them. Pull the PCM towards you, when you feel it pull free, rock the top towards the passenger side. While rocking the top, rotate the bottom up a bit. It will pull right out.
 

·
Registered
Joined
·
1,734 Posts
Discussion Starter #4
ok thanks for the help!
 

·
All done now
Joined
·
22,486 Posts
Anytime, everytime.
 

·
Registered
Joined
·
3,940 Posts
EVERYTIME????
 
1 - 6 of 6 Posts
Top