Ford Power Stroke Nation banner

1 - 20 of 29 Posts

·
Registered
Joined
·
964 Posts
Discussion Starter #1
We had a dyno at a SOCAPS meeting last Saturday, and decided to get my tow pig on the rollers.

I was happy, but could probably get a bit more w a few tweaks.

1st run on the DD tune.

2nd run on the race tune.

Both runs were #2 and a little water.

Here's a link to a few other runs. Mike D crushed everybody as expected.;)
Dyno Video's from the Anniversary Meeting 3-13-10
 

·
Dieselis' Maximus
Joined
·
113 Posts
So what number did you run on those tunes?
 

·
A Ghost these days...
Joined
·
2,434 Posts
Sorry, I put the numbers in the Youtube description, but they don't show in the thread.

DD 464/863
Race 542/979

Here's the dyno sheet.
Thats awesome. What are your main mods? inj? / turbo? / head work?
 

·
A Ghost these days...
Joined
·
2,434 Posts
And you've got the small 42 and 238/80%.... pretty darn good.
Oh yea, I remember your thread about that combo. :bowfast:
 

·
Dieselis' Maximus
Joined
·
113 Posts
Very Nice!
 

·
wheres the fat chicks?
Joined
·
1,833 Posts
wat kind of trans do you have
 

·
Registered
Joined
·
964 Posts
Discussion Starter #18
Thats awesome. What are your main mods? inj? / turbo? / head work?
DI short block w Crowers, WOP fire rings, hypermax springs, DI push rods, modded twin pumps, Swamps 250/80s, Andy Moore's ped kit w a GT4294R.

Oh, and an exhaust brake.

And you've got the small 42 and 238/80%.... pretty darn good.
Thanks man. Great tuning makes a big difference.

wat kind of trans do you have
Morgan at Ultimate Truck built it when we built the motor and swapped the 6 speed. It's billet, w a PI converter, and some pixie dust.

That is your tow rig?:bowfast:
It pulls my toyhauler all the time. It's really easy to drive.

Can I ask whose tuning? Looks good to me.

EDIT: I like that the torque doesnt peak untill 2700-2800, unlike the more common tuning, that peaks around 2300-2400

Matt's chip is in the truck now. He's got everything dialed w the combo, but we may be able to get a bit more out of it w a few changes. :redspotdance:
 

·
Registered
Joined
·
5,346 Posts
Matt's chip is in the truck now. He's got everything dialed w the combo, but we may be able to get a bit more out of it w a few changes. :redspotdance:
Yeah... you are limited to 28 degrees electrical right now..... so at 3000 rpms you at most running 6 degrees of timing:eek:

I have a feeling that's why your power leveled off as soon as it did.... I betcha there's another 10-15HP in there.
 

·
Registered
Joined
·
964 Posts
Discussion Starter #20
Yeah... you are limited to 28 degrees electrical right now..... so at 3000 rpms you at most running 6 degrees of timing:eek:

I have a feeling that's why your power leveled off as soon as it did.... I betcha there's another 10-15HP in there.
I'm not complaining at all! I said I wanted it safe and fun. That's what I have right now.:D
 
1 - 20 of 29 Posts
Top