Ford Power Stroke Nation banner

1 - 19 of 19 Posts

·
Registered
Joined
·
602 Posts
Discussion Starter #1
Any tips would be great
 

·
Registered
Joined
·
4,865 Posts
Is this going on a stock fuel system or aftermarket one? On a stocker its as simple as following the instructions. Should take you a few hours if you have everything organized. If its a aftermarket you may need different fittings and to make sure its between the fuel tank and the fuel water separator filter if you have a dedicated one.
 

·
Registered
Joined
·
602 Posts
Discussion Starter #5
Plan on doing it tonight it came with th pick up tube for the tank but what the directions show is difrent then the parts they sent me I can see how they want me to do it but I think the hose will wrap up. Its got me using the fuel line as the pickup tube and I think it will try to role up in the tank. Ande if it does no fuel but when I get to that point I. Will figure something out.
 

·
Registered
Joined
·
602 Posts
Discussion Starter #6
Harpoon it??
 

·
Registered
Joined
·
602 Posts
Discussion Starter #8
How big of a hole? But won't the hole mess withthe suction once the fuel gets below the hole?
 

·
<<< Power
Joined
·
3,456 Posts
Harpoon is a fill up mod. Just makes it easier to get the last few gallons in there.

Use the pickup that AD sent with the kit, fuel line should have a 90* fitting that threads to that.

If they sent the wrong dirrections, just call them and they can email the proper ones.
 

·
Registered
Joined
·
602 Posts
Discussion Starter #11
Got the install done. But I broke the float off so have to get some new parets before I can test it out. :doh:
 

·
Registered
Joined
·
1,309 Posts
Yup, you'll pull air. Follow the directions. Use the draw straw and call it a day. Pretty simple to install
This was in the instructions that came with my Air Dog 150. Just assumed it was what he was talking about. I actually don't remember if I did it or not, but I have had zero issues, Love my AD!
 

·
Village Idiot
Joined
·
8,209 Posts
put a hole in the PU about a 1/4 to 1/2" up so as to avoid blockage.
i though the harpoon mod was sniping the air vent tube shorter so you can fill up higher, faster.
 

·
Registered
Joined
·
4,865 Posts
I broke the float off :doh:
Did you not read? We said to follow the directions. I did not see that anywhere in them. LOLLOLLOLLOL


Glad you have it done. How long did it take you to break it, I mean, finish the install?

Let us know if you notice anything like the injectors being quieter, better mpg etc? Having the extra pump pulling the fuel many times helps the stock pump maintain more consistent pressure and flow.
 

·
Registered
Joined
·
602 Posts
Discussion Starter #17
It made a huge diffrence. The truck is quiter it starts better and it helped my top en out a lot, maybe another mpg.I'm glad I did this mod. It doesn't act like it doesn't have any fuel left at the top end now I can feel a diffrence through the hole peddle travel.:D
 

·
Registered
Joined
·
1,309 Posts
It made a huge diffrence. The truck is quiter it starts better and it helped my top en out a lot, maybe another mpg.I'm glad I did this mod. It doesn't act like it doesn't have any fuel left at the top end now I can feel a diffrence through the hole peddle travel.:D
What other mods do you have to the truck?
 

·
Registered
Joined
·
602 Posts
Discussion Starter #19
I've got an afe stage ll, full built jasper tranny, 4" turbo back straight to dual 8" stacks, airheater delete, wicked wheel, edge evolution and I leave it on extreme(100hp). Plan on ordering a gt38r this coming week. And I plan on getting an adrenaline pump, a regulated return and a set of hybrids. And a custome chip. Going for around 500hp
 
1 - 19 of 19 Posts
Top