Ford Power Stroke Nation banner

1 - 3 of 3 Posts

·
Registered
Joined
·
520 Posts
Discussion Starter #1
Well, I figured I'd share some pics of my project last week. I had pushed the headgaskets and was puking coolant.

 

·
Registered
Joined
·
520 Posts
Discussion Starter #2
Well its finally all together, full build was the head gaskets, arp studs, Maryland performance 30% nozzles, Elite ported fuel rails, Elite wastegate kit. Already installed the airdog direct to HPFP a month or so ago.Also pulled the trans and clutch to put a new rear main seal in as it was damp when we put the clutch in. Going to work on some more testing and tuneing to get everything dialed in now. Here's a bunch of pictures from the build.

Ready to tear down

Heads off for magnaflux and machining

Swapped injector nozzles, next time i'll be sure to search harder for instructions or a sticky


Wastegate fab

out of the shop, dropped the trans and clutch for the rear main to be installed
 
1 - 3 of 3 Posts
Top