Ford Power Stroke Nation banner

1 - 14 of 14 Posts

·
team cookiemonster 09
Joined
·
129 Posts
Discussion Starter #1
besides the obvious trans,pedals,hydros..... what else is needed to complete the swap auto to manual??? I have herd that the rear cover is different and that may need to be swaped but I really dont know....
 

·
WINNING
Joined
·
1,325 Posts
besides the obvious trans,pedals,hydros..... what else is needed to complete the swap auto to manual??? I have herd that the rear cover is different and that may need to be swaped but I really dont know....
The rear cover and the wiring harness are different, but I'm not sure on the actual procedure to go about doing the swap. IIRC there was a thread about this a while back, I'll do some digging and see if I can find it.

-French
 

·
Registered
Joined
·
346 Posts
:popcorn: want to do the same!
 

·
Haters Gonna Hate
Joined
·
5,869 Posts
I want to convert to an auto. I have been told get the wiring harness, steering colum, guage cluster, etc.
you should head for kansas and we will swap out tranny's then, im dyin for a handshaker
 

·
Haters Gonna Hate
Joined
·
5,869 Posts
Tell me when you want to do this!
lets read up one what all has to be changed, i got all the tools we will need to do it, i work in a john deere shop so that won't be a problem, lets do some research and go for it, what year is your pickup?
 

·
Haters Gonna Hate
Joined
·
5,869 Posts
ok now everyone spill there guts, i need to knows the specifics on this swap, 04-04, both 4x4, im guna put a single mass flywheel in mine as im sure the one coming down will be a dual mass, how much of a pain, will my transfer case off my auto bolt onto the manual? are the transmissions the same length?
 

·
Haters Gonna Hate
Joined
·
5,869 Posts
u talkin to me dougie?
 

·
Captain Negativity!
Joined
·
3,109 Posts
Nope. Talking to Lance. He called me the other night trying to get the clutches in his torqshift. Now he is talking about yanking it out for a 6spd.
 

·
WINNING
Joined
·
1,325 Posts
Lance has a lot of ideas, but for what his truck is being used for, I'd go with a 6sp. over an Automatic. A lot better control while pulling.
 
1 - 14 of 14 Posts
Top