Ford Power Stroke Nation banner

1 - 15 of 15 Posts

·
Registered
Joined
·
2,423 Posts
Discussion Starter #1
Heads have 3k miles on them since brand new.

Hypermax spring kit is installed
I believe brand new stock valves were used, but ill have to double check

Heads are coated on top to shed oil better than painted or bare metal (dont know the name of the coating)

Mild porting and polishing already done.

for a 7.3 powerstroke.


$700 + shipping
 

·
My powerstrike
Joined
·
189 Posts
Who did the work?
 

·
Registered
Joined
·
2,423 Posts
Discussion Starter #4
Talked to South Houstan. For this set of heads they charge right around $1500.

Ill do $600


The springs are stronger than a 910, basically set up for a mild performance cam. The heads are coated like i mentioned.

And what they call a stage 1 port and polish job, he didnt have much info on the port and polish but he verified it definitely was done to these heads.
 

·
Registered
Joined
·
679 Posts
Why did you remove them? Does that mean you are in Houston, TX? Any more info on the coating?
 

·
Registered
Joined
·
119 Posts
do you still have them? how much to ship to 59105
 

·
Registered
Joined
·
2,423 Posts
Discussion Starter #9
The coating is something they do on the top side of the head to shed oil. Not sure the name of the coating, maybe someone can chime in. It looks good though!

I can ship them, but they will have to go freight. So shipping will be near $200
 

·
Registered
Joined
·
1,045 Posts
pm me on info on the valves and if you had a valve job. i may come pick them up, depending on where you live.
 

·
Registered
Joined
·
2,423 Posts
Discussion Starter #14



I realize the picture doesnt show you anything, but the heads are 5 hours from me and i wont be able to get better pictures until Friday morning!
 
1 - 15 of 15 Posts
Top