Ford Power Stroke Nation banner

1 - 5 of 5 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
My ABS light has come and and I get a P215A code. I have read that the sensors may go bad but would it throw this code and how can I determine which sensor? Also, sometimes when I step on the brake, the pedal pushes back as if the ABS kicks in then the pedal will go down as usual. Any help would be appreciated.
Thanks, Jordan
 

·
Registered
Joined
·
11 Posts
Discussion Starter #3
We pulled the sensor out and it wsa clean and everything looked fine. When we hooked it up to the scanner it says left rear sensor but I thought there was only one ABS sensor in the rear? Are these prone to failure?
 

·
WWDD
Joined
·
10,531 Posts
I dont think there is anymore other than the one on the diff

There were quite a few people right off the bat that were having issues, some tuned, some stock. You might look and see if there is a sensor on each wheel but i dont think there is.
 

·
Registered
Joined
·
11 Posts
Discussion Starter #5
There is not a sensor at the rear wheels just on the diff. I ordered a new one and am going to pick it up and put it on and see how it does.
 
1 - 5 of 5 Posts
Top