Ford Power Stroke Nation banner

1 - 5 of 5 Posts

·
Registered
Joined
·
141 Posts
Discussion Starter #1
On Sept 3 we will be haveing our annual sled pull in North Salem, IN

Classes will be the same as the spring pull 2.5, 2.6, 3.0

Hope to see everyone there....

I'll link the rules in soon...

Thanks Paul
 

·
Registered
Joined
·
141 Posts
Discussion Starter #2
Old Fashioned Days "Fall Fleece Pull" Classes and Rules

1. Work Stock Class
・ True 2.5” Inducer Bore NO CLIPPED WHEELS / NO BUSHINGS / NO
TAPERED COVERS
・ .200 MAX mwe Groove
・ No Hanging Weight Beyond Front Bumper (Ballast Permitted)
・ 8000lb Maximum (With Driver)
・ 26” Hitch Height
・ DOT Tires
・ No Dual pumps, no compressed gases or Power Adders of Any Kind
・ Diesel Fuel Only
・ Traction bars are allowed
・ Valid Registration and Proof of Insurance Required
・ Single Wheel Trucks Must Run Single Rear Tires, Factory Dual
Rear Trucks are Permitted to Run Dual Rear Wheels
2. Hot Street
・ 2.6” Inducer Bore
・ Minimum 1/8" Protrusion Into Bore
・ .200 MAX mwe Groove
・ Hanging Weights are permitted within 60” from axle CL
・ 8000lb max (With Driver)
・ Driveshaft loops, u-joint shields and bump stops required
・ Dual pumps are permitted
・ No compressed gases of any kind
・ No Water/Meth
・ 26” Hitch Height
・ DOT Tires
5. Super Street
・ 3.0” Inducer Bore
・ Minimum 1/8" Protrusion Into Bore
・ .250 MAX mwe Groove
・ Hanging Weights are permitted within 60” from axle CL
・ 8000lb max (with driver)
・ Driveshaft loops, u-joint shields and bump stops required
・ Dual pumps are permitted
・ No compressed gases of any kind
・ Water Injection Permitted No methanol
・ 26” Hitch Height
・ DOT Tires

We will also have a stock class....

Paul
 
1 - 5 of 5 Posts
Top