Ford Power Stroke Nation banner
1 - 15 of 15 Posts

·
Registered
Joined
·
114 Posts
Discussion Starter · #1 ·
Just curious if anyone has ever sprayed it in a stock truck? I have intake, exhaust and IDP extreme tunes. Plan on doing head studs,egr delete, batmowheel after I get a suncoast in it but just looking at a little something for now...
 

·
Registered
Joined
·
323 Posts
If you planned on using nitrous, head studs would probably be a smart thing to have before so. Some people have blown head gaskets by just running a big tune. Im not sure on this one but maybe a waste gate also? I would imagine nitrous makes more pressure, or more pressure quicker which may warrant a waste gate, but dont quote me on that because Ive never used nitrous before.
 

·
Madd Dogg Diesel
Joined
·
745 Posts
I ran a 60 jet about 10 times between truck pullin and racing and didn't have any problems with a stock motor
 

·
Madd Dogg Diesel
Joined
·
745 Posts
And that's with over 55 psi boost but I did have a waste gate
 

·
Registered
Joined
·
9,722 Posts
I have sprayed at least 20 bottles through mine when it was stock with 2 .110 jets and had no head gasket problems for at least 15k, stock everything other than tune intake and exhaust
You didn't have any problems until you decided to manually shift your truck while pulling a sled and spraying nitrous. :poke:

:hehe:
 

·
your mom
Joined
·
211 Posts
I would wastegate it atleast to keep drive pressures down .
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top