Ford Power Stroke Nation banner

1 - 9 of 9 Posts

·
Registered
Joined
·
1,524 Posts
Discussion Starter #1
I need to figure out a better way to strap my front end down. The single strap over the crossmember and under the axle isnt cutting it anymore.

Anyone rigging up a better way?
 

·
Registered
Joined
·
183 Posts
I put a strap on both sides, I run it through the spring , hook on top and hook on the bottom shock mount. I use a heavy duty motorcycle strap and pull it down about 1 inch and half. Hope that helps
 

·
Dan the diesel man
Joined
·
82 Posts
We took my buddys and welded a piece of steel to the top of the axle and a bracket to the frame. Mount a shock to both of them and it works pretty nice. We had to play with what shocks to use but it pulls in the 3.0 class with no hopping
 

·
WOOOOO!!!!!
Joined
·
1,655 Posts
We took my buddys and welded a piece of steel to the top of the axle and a bracket to the frame. Mount a shock to both of them and it works pretty nice. We had to play with what shocks to use but it pulls in the 3.0 class with no hopping
pics?
 

·
Dan the diesel man
Joined
·
82 Posts
Sorry I will get them when the truck come back my way. I should have takin them when I did it.
 

·
Registered
Joined
·
28 Posts
i need to see this because mine hops so bad with only a 100hp tune
 
1 - 9 of 9 Posts
Top