Ford Power Stroke Nation banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I'm getting a p0269 code #3 cylinder on my programmer, engine is running very rough! I have a 2004 6.0
Resently I've done the following.
-cleaned turbo and oil change
-new fuel filters
-Changed EGR cooler
-rebuilt FICM

I've been doing alot of research and I see that injectors don't go bad very often. I saw on a thread someone mentioned a BUZZ test? What is that?
Just need a push I the right direction, HELP!!!
 

·
Registered
Joined
·
271 Posts
Sounds like you lost number 3...You need a scanner (Auto Enginuity, Snap On, OTC....)to do a buzz test and power balance test to confirm your problem. Hook up with someone local and get that done to confirm the bad injector. Most likely a bad spool valve on the injector so you if thats the case you need a new injector in that hole.
 

·
Fixing Broken Stuff
Joined
·
2,078 Posts
^^^^ Yup ^^^^
 

·
Registered
Joined
·
19 Posts
I currently have the same problem after my oil cooler change and ended up buying the injector from PMM for less than $200.00. It should arrive today. Just to be safe I went ahead and shipped my FICM to ficmrepair.com for servicing.

Brandon
 
1 - 4 of 4 Posts
Top