Ford Power Stroke Nation banner

1 - 8 of 8 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 04 6.0 L need a ICP regulator (sensor) Fine thread. Everywhere I seen they had different thread.
 

·
Jackleg Mechanic
Joined
·
881 Posts

·
Registered
Joined
·
623 Posts
Make sure when your truck was built. One sensor is for early build trucks and late build gets a different size.

3C3Z-9F838-EA 03-04 early builds, located under turbo, check wire harnesses on both to make sure they don't need replacing at the same time.
^^ 1 1/16 socket

4C3Z-9F838-A 04-07 late builds, located on passenger valve cover
^^15/16 socket

Please verify these part numbers before purchase. Use your VIN number!
 

·
Registered
Joined
·
1,586 Posts
yep, sunrise or riffraff
 

·
"resident smarty pants"
Joined
·
4,356 Posts
The thread size on all 6.0L ICP sensors should be the same though.

Also - from what folks tell me, the newer model year ICP sensor should work just fine in the earlier model year engines. M12x1.5
 

·
Registered
Joined
·
623 Posts
The thread size on all 6.0L ICP sensors should be the same though.

Also - from what folks tell me, the newer model year ICP sensor should work just fine in the earlier model year engines. M12x1.5
Did I get the right part numbers there Mark?

And I have been seeing the newer model year able to be used in early model year.
 

·
"resident smarty pants"
Joined
·
4,356 Posts
Absolutely.

The 04 early build was up to 9/22/03.
 

·
Registered
Joined
·
406 Posts
get it from sunrise best customer service around
 
1 - 8 of 8 Posts
Top