[Bugman]

Here is what I have:

Large terminal: Wire from battery, 2 green wires tied through a fusible link to a black wire with orange tracer, 2 white wires through a fusible link to loom and 2 more white wires through a fusible link to loom which I believe goes to the under hood fuse panel.

Smaller terminal bolt: Red wire that goes to the starter solenoid on the starter.

Small terminal: Push on connector that goes to the key switch.

There are no grounds on this solenoid, it grounds through its body to the body of the truck. So in the long run all the wires except for the 12 ga red wire and the smaller one from the key switch connect to the large terminal with the battery power.