Ford Power Stroke Nation banner

1 - 20 of 20 Posts

·
Black Stroker
Joined
·
1,187 Posts
Discussion Starter #1
Can a 1995 powerstroke motor work in a 2000 powerstroke? Is it the same motor?
 

·
Premium Member
Joined
·
15,561 Posts
Short answer.........yes.


long answer...........you will have to put a freeze plug into the spot where the mech fuel pump is at, and unless your changing injectors you will need tunes to run the small AA injectors.
 

·
john
Joined
·
157 Posts
im running 95 eng in late 99 no mods or inj change runs great?
 

·
Black Stroker
Joined
·
1,187 Posts
Discussion Starter #4
I got some stage 1 going in it and a gen 3 so were do I get that plug at
 

·
john
Joined
·
157 Posts
never touched them has aa injectors runs great why change them?
 

·
All done now
Joined
·
22,486 Posts
I got some stage 1 going in it and a gen 3 so were do I get that plug at
It is a freeze plug. Not sure of size. Measure it and get it at the nearest auto parts house of your choice. Try to find a real parts man, not just an employee. They will be lost.
 

·
All done now
Joined
·
22,486 Posts
Seems like I remember that number also.
 

·
Black Stroker
Joined
·
1,187 Posts
Discussion Starter #11
another question can you swap in a 95 powerstroke into a like 83 model ford diesel idi
 

·
All done now
Joined
·
22,486 Posts
Yep, but you need to swap a lot more than just the motor.
 

·
All done now
Joined
·
22,486 Posts
TPS, MAP sensor. All of the wiring, possibly a VSS. I am sure we are forgetting a lot.

To say nothing of the fabbing to make it all fit.
 

·
Black Stroker
Joined
·
1,187 Posts
Discussion Starter #16
alrite thanks you all and i was also wondering for a turbo for the 95 motor can you use all the same stuff off the 99-03 7.3l like turbo mounts or is all that different
 

·
All done now
Joined
·
22,486 Posts
You can, but you have to change everything over. Up pipes, collector, turbo, pedistal, intake Y, intake plenums, intercooler (added) and intercooler pipes.
 

·
Black Stroker
Joined
·
1,187 Posts
Discussion Starter #18
alrite so that is what you have to run like a h2e
 

·
All done now
Joined
·
22,486 Posts
That is why I went with the H2E, I had to change everything anyway, I could get the H2E kit cheaper than getting all the parts to switch from a early 99 to a 99.5 and up.
 

·
Black Stroker
Joined
·
1,187 Posts
Discussion Starter #20
is the block and heads and crank the same on the 95 as in the 2000
 
1 - 20 of 20 Posts
Top