Ford Power Stroke Nation banner

1 - 9 of 9 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter #1
I'm installing auxiliary switches in my dash, where the 4x4 knob would be. What is the best way to cut through the dash so I can put the switches in? Any help would be appreciated!
 

·
Master BS'er
Joined
·
5,931 Posts
Drill a hole big enough to fit a small saw blade in it, then cut out the square. Or use a cutoff wheel but that's not easy to cut square with a wheel. Up to you.
 

·
Registered
Joined
·
3,369 Posts
multitool works great for plunge cuts into plastic

You can heat up a steak knife and push it through also, remove, heat, cut, remove heat cut until you have your square
 
  • Like
Reactions: jamiesaun

·
Administrator
Joined
·
8,278 Posts
multitool works great for plunge cuts into plastic

You can heat up a steak knife and push it through also, remove, heat, cut, remove heat cut until you have your square
Glad to see im not the only one with a steak knife in the tool box
 

·
Registered
Joined
·
3,369 Posts
my steak knife is one of my fav tools, when crushing trucks it is soooo handy to cut through hoses it gets used!!
 

·
Administrator
Joined
·
8,278 Posts
And dry wall in a pinch.
 
  • Like
Reactions: 410customs
1 - 9 of 9 Posts
Top