Ford Power Stroke Nation banner

1 - 4 of 4 Posts

·
Registered
Joined
·
198 Posts
Discussion Starter #1 (Edited)
i have researched the living hell out of the level kit/tire size. so many dang variables!!

im hoping some will chime in here with some pics of 99-04 leveled on some 35s, i was wanting to do a 2.5-3 level kit but dont wanna spend on buying new tires and wheels. i currently sit on 315/75-16 on 16x10 eagle wheels on an 8 inch lift, dont know the offset i assume its some kind of standard offset.

so the big question is how likely is it i can stuff a 315-75-16 with a 3 inch level kit? with all my research im leaning toward getting Icons 4.5 inch hanger kit. i wanna make my truck usable again ! i do realize that with a 3 there may be some minimal rubbing it seems.
 

·
Registered
Joined
·
164 Posts
I had 315's on my 01 with just a leveling kit with stock rims. I had very little rubbing. I went to actual 35's on 20x10's with 5" back spacing. and i got pretty good rub on the bumper.
 

·
Registered
Joined
·
1 Posts
I have a 99 f250 with a 2.8" front 2" rear leveling kit and 315's(34.7") on 17" rims. I didnt research out the backspacing like i should have so have a minor rub on the front leafs at full lock. Very minor rub just making a shiny spot of the front leafs behind the axle.will post a pic if i can get it figured out(still pretty new to this forumn...
 

Attachments

·
Registered
2001 Lariat F350. Leveled, 5” exhaust, ww38, 6637,
Joined
·
31 Posts
I’ve got a zone Offroad 2.5 leveling kit on my 2001 f350 now. Currently running 285/75r16s on stock 6.0 wheels and have tons of room. I’ll be going to a 315/75r16 when I get new tires if I don’t go goofy and get 18x10s and 35x12.50r18s...
 

Attachments

1 - 4 of 4 Posts
Top