Ford Power Stroke Nation banner

1 - 15 of 15 Posts

·
Flatulent entrepreneur
Joined
·
89 Posts
IMO, the bulbs are cheap. Swap your turn signal bulbs. If you do one and it blinks faster, like a bulb is out, swap the original back in and order a resistor before installing all the way around. I'm guessing you'll need 1 for each side. Hope this helps.


Sent from AutoGuide.com App
 

·
Registered
Joined
·
868 Posts
Screw the resistor, just asking your problem. My truck has leds all the way around and I went with a LED compatible flasher. Part number EP27 at your local autozone or advance

Sent from my DROID RAZR using AutoGuide App
 

·
'05 Excursion
Joined
·
1,948 Posts
Agreed, a digital relay is THE way to go.
 

·
Registered
Joined
·
338 Posts
Where is the relay ?
 

·
Registered
Joined
·
41 Posts
I buy all my leds from superbrightleds.com. They have all the bulbs you need there and also that special flasher. I've ran them in my ranger and my super duty for years with no issues.
 

·
Flatulent entrepreneur
Joined
·
89 Posts
The relay on mine is behind the center if the lower dash. I have no idea why they stuck it there. Was a pain to reach. I removed the panel for the trash bag holder an reaching toward the fuse panel, its on its own little panel. Remove the cover and swap the relay.


Sent from AutoGuide.com App
 

·
'05 Excursion
Joined
·
1,948 Posts
1 - 15 of 15 Posts
Top