Ford Power Stroke Nation banner

1 - 8 of 8 Posts

·
Registered
Joined
·
389 Posts
Discussion Starter #1
I came across a few new trannys, 7C3P-7000-BC they were behind a 6.4L. Will they work behind a 6.0? I think the T/C is different but is the base tranny the same?

I don't have a 6.4L but I would'nt mind a spare for the 6.0's.

thanks
Jeremy
 

·
Registered
Joined
·
3,389 Posts
I came across a few new trannys, 7C3P-7000-BC they were behind a 6.4L. Will they work behind a 6.0? I think the T/C is different but is the base tranny the same?

I don't have a 6.4L but I would'nt mind a spare for the 6.0's.

thanks
Jeremy
couple things are different depending on the years. the newer 6.4's got rid of the external filter and just run a better filter in the pan. the pumps and converters are different too. im sure you can make it work though.
 

·
Registered
Joined
·
504 Posts
i've always heard the main difference is the pan and the associated filter.

Shouldnt be a problem using it as far as I know...
 

·
Registered
Joined
·
2,448 Posts
how about the bell housing pattern?
Crossmember placement?
j/w
 

·
Super Moderator
Joined
·
3,401 Posts
The TC has additional studs IIRC. The rest should just bolt up. I did the swap over to the '08 pan and pan filter a while back with no problems.
 
1 - 8 of 8 Posts
Top