Ford Power Stroke Nation banner

1 - 4 of 4 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter #1
This may already be documented and if so please just delete this. Also title should say ‘IPR Test Tool.’ Drink to much and try to be productive... this is what you get.

If not! Then I made my own IPR test tool for a whooping $44.

There are a few you can but ranging for 88$ on eBay to 200$ at some places. If your a DIY’re like myself then if anything this should last all the time I’ll need it.

So I bought the IPR test fitting off amazon for $10. The I went over to Home Depot and bought the following.



Then once I went through the extensive 5min assembly, I got this.

 

·
"resident smarty pants"
Joined
·
4,169 Posts
Thanks for the post!
 

·
Registered
Joined
·
95 Posts
Discussion Starter #4
Finally got to test it out. Worked like a charm!

I never read to do this until stuff was hitting the fan... if it were me I’d do this test any time I made a change that affected the HPO system. Shoot if I had done this when I put new seals on the injectors I might not have had to tear it down again...


Sent from my iPhone using Tapatalk
 
1 - 4 of 4 Posts
Top