Ford Power Stroke Nation banner

1 - 3 of 3 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter #1
ok finally the IDI is out and the PSD is in and running. I seen a lot of controversy over if the e4OD rom the IDI will work on a PSD. The answer is YES. the 4eod from my 94 IDI remained in the truck and the PSD bolted right to it and the trans has no issue with the motor as of yet. Only issue i ran into was the trans harness from the PSD and the one from the IDI varied at the plugs. so what i did was got a trans harness from the e4od off a 0 97 which was the donor truck for the electronics in this job and cut the trans side plugs and put my IDI harness plugs on and no more issue. So so far no issues, starts up and runs great and shifts good.
 

·
Registered
Joined
·
389 Posts
pics?
 

·
Registered
Joined
·
34 Posts
Discussion Starter #3
they only ones i have is the motors before ans after, nothing real good
 
1 - 3 of 3 Posts
Top