I welded a ring around the ends of my ic pipes and it's worked like a charm. I used stick welding rod for the ring, just tacked it in place all the way around the pipe.
IC Boot Help
Having a hard time keeping the stock boots on with the gt42r and 50psi of boost. IC tubes are stock but the intake Y and intakes are smooth. I just bought some better clamps and hose. I have cleaned and roughed up the clamp area's and tried the hairspray trick.
But here's my question. I'm thinking of welding some wire, about the thickness of a coat hanger, around the ends of the tubes to help keep them from sliding off. Good idea, bad idea?
Any other idea's? Thanks.
But here's my question. I'm thinking of welding some wire, about the thickness of a coat hanger, around the ends of the tubes to help keep them from sliding off. Good idea, bad idea?
Any other idea's? Thanks.
1 - 1 of 19 Posts
1 - 1 of 19 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Ford Power Stroke Nation
A forum community dedicated to Ford Power Stroke owners and enthusiasts. Come join the discussion about diesel performance, modifications, EGR deletes, troubleshooting, lift kits, tires, wheels, maintenance, and more!
Full Forum Listing
