[Zakyia20]

Hey guys I just bought a 1997 Ford F-350 7.3 it was an automatic but the people that owned it before the guy I bought it from had swapped it to a 5 speed and the clutch is sticking to the floor the previous owner replaced the master and slay cylinder and it didn’t fix the issue so I’m assuming I’m gotta have to replace the clutch, fly wheel and pressure plate. What would you guys recommend for a reliable but cheap clutch kit the truck is stock and I don’t intend onvdoing much work to it..

 

[Bugman]

I have a LuK in my truck and have been quite satisfied.

 

[Hendy]

Welcome To PSN

I don't know much about manuals but I came here to say that your truck looks super good!

I will do some research to try to figure out this issue though

 

[Jax]

Hey guys I just bought a 1997 Ford F-350 7.3 it was an automatic but the people that owned it before the guy I bought it from had swapped it to a 5 speed and the clutch is sticking to the floor the previous owner replaced the master and slay cylinder and it didn’t fix the issue so I’m assuming I’m gotta have to replace the clutch, fly wheel and pressure plate. What would you guys recommend for a reliable but cheap clutch kit the truck is stock and I don’t intend on doing much work to it..

Welcome to PSN!

Please give more information. What is "clutch is sticking to the floor?"

Do you push the clutch pedal and the pedal goes to the floor and stays there?

If someone pushes the clutch, and you are underneath watching the operation of the slave cylinder push rod on the clutch fork, what does it do?

If it "sticks to the floor", does that mean you cannot pull it back with your hand?

 

[Zakyia20]

Welcome to PSN!

Please give more information. What is "clutch is sticking to the floor?"

Do you push the clutch pedal and the pedal goes to the floor and stays there?

If someone pushes the clutch, and you are underneath watching the operation of the slave cylinder push rod on the clutch fork, what does it do?

If it "sticks to the floor", does that mean you cannot pull it back with your hand?

Hey sorry sir whenever you push the clutch down it just sticks I haven’t had anyone crawl underneath and look at the slave cylinder to make sure it’s engaging but I’ll definitely keep that in mind and and what I mean is you can press the clutch and it’ll just stay on the floor if you put your hand or foot underneath of it to release it

 

[Jax]

The clutch pedal has a little knob on it that attaches to the push rod of the clutch Master cylinder.

Please watch this video and check yours out. It is a straight-forward if cursing-generator repair.

 

[1970something]

didn't you just replace that little doohicky on the beast Jax?

 

[Jax]

didn't you just replace that little doohicky on the beast Jax?

Uh, huh. That is why all the questions. Same symptoms.