Ford Power Stroke Nation banner

1 - 7 of 7 Posts

·
Registered
Joined
·
128 Posts
Discussion Starter #1
Do i need to pull my pcm and get the code off of it? Where is the code? And also do i have to drop the inner fender well to pull it out?? Thanks in advance Roger And i`m doing a diy idm mod i will let you know how it goes and the difference i notice.
 

·
I know nothing...
Joined
·
6,115 Posts
I just got though doing the TS Tony wildman chip in the Green Truck. I'll post all tonight. You will want to drop the inner fender, it will make things vastly easier. Also the code is on the passenger side of the PCM. You'll have to look very far over the fender to see it.
 

·
Registered
Joined
·
128 Posts
Discussion Starter #3
So i do need to get the pcm code? How long does it take to pull the pcm out? Do i have to pull he pcm to get the code or is it on the part sticking out?
 

·
I know nothing...
Joined
·
6,115 Posts
TS Chip install - Powerstroke Nation

If you're getting it from Tony he didn't have to have my code. Here's a good link if you don't want to pull the PCM. I pulled mine because when I put this same chip into another truck last summer I F*#KED it all up by removing the silver from the contact points. Ues a scotch bright pad as TS recomends, it's better to not remove enough than to remove to much. And BTW the Green Truck is much more fun to drive now, I can't load the turbo and take off without smoking the tires in the top 2 positions Street/Strip & All Out.
 

·
Registered
Joined
·
128 Posts
Discussion Starter #5
LOL Awesome I had one of tony`s chips a couple of years ago, but i forgot if he needed the pcm code or not. I also didn`t remember how long it took me to get the pcm out to put the chip on. Thanks for answering these questions, Roger
 

·
Registered
Joined
·
128 Posts
Discussion Starter #6
Where exactly is the pcm code?
 

·
Registered
Joined
·
745 Posts
On the PCM you may have to pull it. You dont have to have it to order a chip but i have seen some post where they did not include the PCM code and had some issues so i would make sure he has it.
 
1 - 7 of 7 Posts
Top