Ford Power Stroke Nation banner

1 - 10 of 10 Posts

·
The Original
Joined
·
7,509 Posts
Discussion Starter #1
HPOP Test Gauge 0-5000 PSI 94-2003 7.3L Powerstroke and International engines.

Complete with 3 foot hose and rail adapter for 7.3L

Allows proper diagnostics of the HPOP output at start-up and during driving test.

Cost is $80 shipped to your door in the lower 48 :D

5 in stock and ready to ship

 

·
Registered
Joined
·
486 Posts
I will take one!!
 

·
Back to Civilian Life!!
Joined
·
2,469 Posts
Where does this thread into to get the pressure reading?
 

·
Running at last...
Joined
·
2,789 Posts
Where does this thread into to get the pressure reading?
It would be into a port on the High Pressure oil rail... All you have to do is pull a plug on one of the oil rails and thread this into it... then put the gauge in a spot were you can see it when you are in the cab.. most just tape it to the windsheild..
 

·
The Original
Joined
·
7,509 Posts
Discussion Starter #8
Where does this thread into to get the pressure reading?
It would be into a port on the High Pressure oil rail... All you have to do is pull a plug on one of the oil rails and thread this into it... then put the gauge in a spot were you can see it when you are in the cab.. most just tape it to the windsheild..

^^^ he is correct...

i want 1 send me pay pal info or eight 3 two 229 five 9 eight seven thanks

Rich invoice sent:ford:
 

·
Back to Civilian Life!!
Joined
·
2,469 Posts
Thats what I was figuring. I have seen guys take it and drill a hole in the plastic where the wipers are mounted to and have them sticking through there. I will be needing one of these eventually but with my mods its not really a must at this current time.
 
1 - 10 of 10 Posts
Top