Ford Power Stroke Nation banner
1 - 1 of 1 Posts

·
Registered
Joined
·
245 Posts
Discussion Starter · #1 ·
I am working on getting one of my older 7.3s back on the road and was cleaning up the engine valley the other night (had two inches of crap accumulated from over the years with the oil leaks ect that were never addressed by PO.

I noticed that one of my HPOP lines does not have the release on it anymore, and am not able to get it out of the fitting at the HPOP. Will I have to remove the stc fitting from the hpop and replace that and the line or does someone have other ideas of how to get the line out without removing/replacing the fitting.
 
1 - 1 of 1 Posts
Top