[Jax]

My 2000 F350 7.3L Automatic crew cab 4WD with almost 300K miles. New to me June 2021.

Rebuilt most of the front end last year - removed lift kit. New front springs, Steering gear box, power steering pump, Ball Joints, seals, etc. Truck had rear-ended a car and I believe had damage.

It has had the C1145 Right Front Wheel Speed Sensor Input Circuit Failure since I have owned it, says FORScan. I finally got around to troubleshooting it.

I replaced the entire R/F speed sensor with a Motorcraft, just to be sure and because of its accident history.

Still throws Code. EDIT - Brakes work fine.

I have the Ford Pinpoint Test D for the code. It wants me to install an EEC-IV 60-pin break-out box.

Yeah . . . don't have that. What are my alternatives?

 

[Jax]

. . . . nobody?

 

[Hendy]

Electrical things are where my small amount of knowledge end

 

[Jax]

Thanks, @Hendy, I'm pretty good at it. I just hate the idea of chasing wires.

 

[Jax]

Step 1. Wait until it is warm enough that you can dress warm and still be able to work outside laying on a cold truck and / or cold ground in a freezing breeze.

 

[cjfisher]

Step 2. Hit it with a bigger hammer.

Cj