Ford Power Stroke Nation banner

1 - 9 of 9 Posts

·
PSN Veteran
Joined
·
2,983 Posts
IIRC the bolts are 8mm. Twist the valve and pry it out, then just use parts cleaner to clean it. Re-install.
 

·
Registered
Joined
·
969 Posts
got any better pics of that deer in your avatar?
 

·
screw the DARK SIDE
Joined
·
948 Posts
IIRC the bolts are 8mm. Twist the valve and pry it out, then just use parts cleaner to clean it. Re-install.
I didnt think u were suposed to clean egr's with brake cleaner. I always dump a can of seafoam in a cup and then set the egr valve in the cup and let it soak for about 3 hours. Imo the brake cleaner is to harsh for the orings.
 

·
Registered
Joined
·
652 Posts

·
PSN Veteran
Joined
·
2,983 Posts
I didnt think u were suposed to clean egr's with brake cleaner. I always dump a can of seafoam in a cup and then set the egr valve in the cup and let it soak for about 3 hours. Imo the brake cleaner is to harsh for the orings.
:doh: i forgot to mention getting a new O-ring kit from Ford. My bad :pointlaugh:
 
1 - 9 of 9 Posts
Top