Ford Power Stroke Nation banner

hard start cold no start hot

5535 Views 9 Replies 7 Participants Last post by  pxt144
I was helping a neighbor diagnosis his 99 Powerstroke today. He had an issue where the truck lost power and would not restart hot. He replaced the IPR and the ICP, checked fuel, replaced fuel filter, checked fuel pump. I ran some diagnostics on the truck with AE and truck is very slow to build HP oil when cold and the duty cycle had to go to like 60% before it could build 500psi to fire the injectors. When hot it will only got to just under 400psi and spikes the duty cycle to 65% with no start. Buzz test passes fine but contribution fails number 8 only every time. There were codes after the drive cycle for low/high inj pressure and inj pressure delta. Truck runs OK but duty cycle looks high to me for conditions.

My diagnosis is most likely leaking injector O-rings with number 8 be the place to look first. HPOP was replaced a year and a half ago due to a fitting failure in the pump. What do you guys say?
1 - 3 of 10 Posts
He was planning on doing all 8 plus glowplugs. I mostly wanted a more educated opinion on the root problem.

Tom
ICP was replaced before I looked at it along with IPR. I though the ICP readings looked stable just low. Pressure was very slow to build when cranking.


Tom
1 - 3 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top