Ford Power Stroke Nation banner

Glow Shift fuel pressure gauge install question

1K views 3 replies 3 participants last post by  powerstrokeshellback 
#1 ·
Alright so fuel pressure gauge is in, 64 psi at idle and 60 psi WOT. Great stuff there but i am lookin for ideas on mounting.
I mounted the sending unit right on the fuel bowl
The sending unit rides against the coolant hose pretty hard and i know eventually its gonna wear throught the hose.
I am thinking either put a piece of old hose between the sending unit and coolant hose.
Cutting a piece of aluminized pipe and glueing it to the coolant hose
Or just buy the relocation kit and move the sender wherever i want.

Obviously the relication kit is the best option but im just wondering if anyone else has different ideas or what has worked for you guys with the same problem.

:dfpsn:
And that cuz i think its funny!
 
#3 ·
For now i just backed off 1/2 turn to get the connectors furthur away from the hose and put a hose gaurd on. Should be fine till the relocator hose comes.

Where did you find the 45* fitting.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top