Ford Power Stroke Nation banner

1 - 10 of 10 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Hey psn gurus I have my number 2 and 6 glow plug out on my 6.0 and was wondering of I got with a dif brand than what's in it right now if I should change all of them or if it would effect them at all and what is the best way to change it a friend of mine told me to take my finder well off then I could access it from there?!:dfpsn:
 

·
I Love Work'N On Hot Rods
Joined
·
1,549 Posts
Well I would replace ALL of them since they arent that expensive. You will need the special tool for pulling the glow plug harness so you dont damage it. You shouldnt need to remove the fender wells at all. The passenger side ones will be the hardest but you can get them out ok.

I went with these and I have about 9k miles on them so far and they seem to work really well and they are made in the USA FWIW.

Ford 6.0 6.0L Diesel Powerstroke Glow Plugs 04-06 +Tool | eBay

Hope this helps. Best of luck man.
 

·
Gambled and Lost 6.oh
Joined
·
927 Posts
hardest part is getting the cap off of them without breaking it, but just be a little patient and its not that big of a deal at all :)
 

·
I Love Work'N On Hot Rods
Joined
·
1,549 Posts
Yea as mentioned just be careful with the harness. I highly recommend the special tool so you dont damage it.
 
1 - 10 of 10 Posts
Top