Ford Power Stroke Nation banner

1 - 8 of 8 Posts

·
Registered
Joined
·
775 Posts
Discussion Starter #1
ok i got my gauges hooked up but the only thing is im not sure if its all correct info how do i now will it all be correct when i put it in and with the boost im only geting 11 psi is that correct and its taking a while to build up its not a quick responce
 

·
Registered
Joined
·
3,297 Posts
NO your boost should be upwards of 30, and boost moves very quickly. SOunds like you might have it plugged up or a leak in the tube somewhere.
 

·
Registered
Joined
·
775 Posts
Discussion Starter #4
i got it i had a bad sensor but got it fixed and ******** alot differnt i am pushing around 30 thx
 

·
Registered
Joined
·
1,435 Posts
I have had a couple autometer boost gauges have a bad spot around 15-20 and the needle sticks, tried another gauge and went to 30. You can test this by regulating shop air down down to 30 PSI and shooting it in the tube.
 

·
Registered
Joined
·
775 Posts
Discussion Starter #6
yeah i didn't go with auto meter i have ones called spek there really nice i would recommend over auto meter anyday
 

·
Dieselized
Joined
·
526 Posts
sounds to me that it is hooked to the MAP sensor or that MAP hose it will read 11 psi if it is hooked there
 

·
Registered
Joined
·
775 Posts
Discussion Starter #8
well nope it wasnt it was hooked straight to the intake but it was a bad sensor and got it fixed now pushing 30 strong
 
1 - 8 of 8 Posts
Top