Ford Power Stroke Nation banner

1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Ok...... super frustrated with this fuel pump delete. Have removed and plugged the manual fuel pump. Removed the bango bolt and just put a “T” fitting in place.

Had a small fuel pump on the side rail.... but didn’t read the specs. It only produced about 5 psi. Barely enough to keep it at idle.

We now have the bosch style pump installed. No fuel flow. No fuel pressure . We pulled the inline pump back off and tried to fill with diesel still no fuel flow. I turned it around backwards and forwards and still nothing.

This seems pretty straight forward, I have so idea what I’m doing wrong.
 

·
Registered
Joined
·
5,566 Posts
Did you delete the filter housing also?

Sent from my SM-J737V using Tapatalk
 

·
Registered
Joined
·
4 Posts
Discussion Starter #4
No, we haven’t deleted the fuel bowl yet. We were wanting to upgrade one piece at a time, to understand systems a little better, and we are starting a hot shot company, so.... we are on a budget. Both my fathers and my fuel pump have gone down at the same time. We decided this would be the time to upgrade opposed to installing the old mechanical.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #5
Thanks, I’ll search E Fuel. I was pretty sure the was a thread somewhere, just wasn’t sure how to find it.
 

·
Registered
Joined
·
5,566 Posts
1 - 6 of 6 Posts
Top