[nuclearlemon]

any denverites have a good local source for the viton orings for the fuel drain valve? mine's gone from a few drops to a stream, so i guess i better figure that out next.

 

[THEDIESELMAN]

Don't know the size of o-rings but a hydro shop will have them you can also take the o-rings off and flip them around for a quick fix.

 

[smorris]

10-4. I flipped mine and havent had a leak since. Make sure you clean em real good with some brakeclean. The color will wipe right off.

 

[Redfish]

I think you can get some at NAPA but they come in an assortment, then you have a bunch or rings with no use.

 

[thehammer69]

any denverites have a good local source for the viton orings for the fuel drain valve? mine's gone from a few drops to a stream, so i guess i better figure that out next.

You just need O-rings that measure 1/2" OD and 1/4" ID.

Hammer

 

[plainredtruck]

You just need O-rings that measure 1/2" OD and 1/4" ID.

Hammer

and preferably Viton

Check www.mcmaster.com you can get a package of 25 for cheap.

prt