Ford Power Stroke Nation banner

1 - 12 of 12 Posts

·
got fuel?
Joined
·
2,581 Posts
Discussion Starter #1
Tach moves while cranking, replaced cps and that didn't cure it.
 

·
got fuel?
Joined
·
2,581 Posts
Discussion Starter #3
Checkin ipr and fuses now.
 

·
got fuel?
Joined
·
2,581 Posts
Discussion Starter #5
It was good. Then he said it started again. Something loose maybe electrical?
 

·
King of my own world
Joined
·
410 Posts
I know this is an old thread, but does anyone else have any info on this. mine stalls going down the hwy. push in clutch and it will keep running or start back up. but sometimes it dies completely.
 

·
Registered
Joined
·
80 Posts
had this same problem all i did was replaces the cam shaft sensor and its been fine ever since but ive heard theres 2 different problems with the same sounding issues hook it up to a code reader
 

·
King of my own world
Joined
·
410 Posts
Ok ive been hunting around and found i can wiggle the connector on the ipr.
not the plug but the one that is fixed into it. any idea what thats gonna cost me? if thats even it.
 

·
King of my own world
Joined
·
410 Posts
or could it be a bad aps?
 

·
got fuel?
Joined
·
2,581 Posts
Discussion Starter #11
had this same problem all i did was replaces the cam shaft sensor and its been fine ever since but ive heard theres 2 different problems with the same sounding issues hook it up to a code reader
Yea, Martys diesel did, couldnt find anything.
 

·
Registered
Joined
·
446 Posts
Ok ive been hunting around and found i can wiggle the connector on the ipr.
not the plug but the one that is fixed into it. any idea what thats gonna cost me? if thats even it.
Tighten down the tin nut that holds that solenoid (I think it's a solenoid) onto the IPR.
 
1 - 12 of 12 Posts
Top