ford badge on grill?
1 - 4 of 4 Posts
there are studs on the sides. when you push them through the hole the just kind of clip in.
If you take if off be careful not to break the slot it goes in or it will flop around when re-installed.
Ill see if i can find a pic of it from when i removed it when i painted my grill
If you take if off be careful not to break the slot it goes in or it will flop around when re-installed.
Ill see if i can find a pic of it from when i removed it when i painted my grill
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Eliminate ignition switch with racing style pushbutton start
1999-2010 Super Duty General AftermarketSo the other day my 2004 6.0l went down hard...but this post has nothing to do with the motor trouble. I needed to push ol'girl under the carport so I could start working on the motor, my sister was standing right there so I asked her to jump in and steer. I told her that without power steering...- 3
- 301
-
Why 2 Alternators?
1999-2010 Super Duty General AftermarketWhat is the purpose of having two alternators? I'm asking because my truck has dual alternators and I am planning to upgrade / replace them. When contacting https://www.dcpowerinc.com/ they recommended disconnecting the lower alternator and just going with a higher output single alternator...- 18
- 28K
-
Finding the correct rotors for early 99
1999-2010 Super Duty General AftermarketI bought the truck a couple years ago, it now has about 180,000 miles on it. It has developed a bit of noise on the left front wheel so I took it apart to find that the inner wheel bearing is worn. So I head off to NAPA auto parts. I have always had good luck with NAPA. It turns out that the...- 4
- 242
-
PVjimmy · updated
-
Best brakes and rotors 03 f350 4wd
1999-2010 Super Duty General AftermarketI'm in need of brakes on my truck I do alot of pulling and the stock stuff just not holding up especially the front and rotors so was wondering what everyone has been using and seems peddle getting soft to I was thinking about goin to stainless brake lines also was wanting to see who has...- 4
- 500
-
LMC Truck parts quality???
1999-2010 Super Duty General AftermarketHello to everyone I have a 04 F350 and i need some parts of the front end that LMC Truck have, but I'm not sure about the qualitity of their parts https://www.lmctruck.com/- 4
- 571
-
SimonF350_2004_6.0 · updated
Join now to ask and comment!